Mechanical Roller Mill
Mechanical roller mill with separate feeding and grinding systems.
Wear parts are excluded from warranty.
Available specifications
| Model | L × W × H (mm) | Weight (kg) | Inlet ΦD (mm) | Inlet φd (mm) |
|---|---|---|---|---|
| MSQ/J 80×25×2 | 1660×1560×1822 | 2280 | 130–160 | 120–150 |
| MSQ/J 60×25×2 | 1460×1560×1822 | 1980 | 130–160 | 120–150 |
| MSQ/J 50×25×2 | 1360×1560×1822 | 1650 | 130–160 | 120–150 |
Roll sizes and operating options
Choose the roll length and drive ratio for the milling passage. The options below apply to the MSQ/J series; the quotation identifies the selected motor and drive.
| Specification | Value / selection |
|---|---|
| MSQ/J 80×25 — roll diameter × length | Ø250 × 800 mm |
| MSQ/J 60×25 — roll diameter × length | Ø250 × 600 mm |
| MSQ/J 50×25 — roll diameter × length | Ø250 × 500 mm |
| Roll working diameter | Ø220–250 mm |
| Fast-roll speed | 450–600 r/min |
| Fast / slow roll ratio options | 2.5:1; 2:1; 1.5:1; 1.25:1; 1.14:1 |
| Front feed-roll speed | 60–180 r/min |
| Feed-roll ratio options | 3:1; 2.5:1; 2:1; 1.5:1; 1:1 |
| Feed-roll motor | 0.37 kW |
| Pneumatic lifting pipe diameter | Ø60–120 mm |
| Listed motor power options | 60×25: 5.5–15 kW; 50×25: 4–11 kW. Request the motor selection for 80×25. |
Select the model by material, throughput and installation requirements.
Select for your process
Identify the milling passage and stock duty. Confirm the mechanical configuration and discharge arrangement before selecting the size.
- Independent roll engagement and gap adjustment let the operator set the grinding gap separately from engaging the rolls.
- The motor sits inside the machine base to save floor space.
- Gravity or pneumatic product evacuation is selected with the line design.
Check the installation and supply scope
Space and access
Confirm the overall drawing, supports and maintenance clearance for the ordered version.
Connections
Provide inlet, outlet and utility positions. Existing equipment is checked against drawings.
Site conditions
Tell us the site voltage, frequency and operating environment when you enquire.
Included equipment
Motors, controls, supports and utility equipment are itemized in the quotation.
Questions before ordering
How do I choose the configuration?
Identify the milling passage and stock duty. Confirm the mechanical configuration and discharge arrangement before selecting the size.
Are these figures the final offered specification?
Select the model by material, throughput and installation requirements.
What warranty applies?
3 years on the machine. Wear parts are excluded. The quotation defines the supplied equipment and warranty scope.
Spare parts and replacement enquiries
For an existing machine, send the nameplate, serial number, part photos and dimensions. A similar model name alone does not establish part compatibility.
Explore spare partsAssembly and fabrication views
These fabrication examples show visible components and connection details. The supplied configuration is confirmed with your order.
Paired rolls and bearing supports
Roll pairs are assembled on their supports before enclosure assembly.
Roll-end adjustment components
The close view shows the roll ends, bearing housings and adjacent adjustment mechanisms.
Discuss your mechanical roller mill
Send your requirements to the Farivo engineering team.
WhatsApp Farivo