Wheat & maize flour mills · 20–500 TPD · Complete lines and single machinesWhatsApp +86 155 3803 1104  ·  sales@farivomill.com
Menu
ProductsFlour mill machinesSpouting & pipeworkSpare parts & consumables SolutionsComplete flour millsMill upgrades Maize flour millsHow a flour mill worksMill audit ProjectsAbout UsContact
WhatsApp an engineer
Home / Products / Spouting & pipework / Inspection and cleaning pieces

Inspection and cleaning pieces

Inspection pipes, cleaning pipes with doors, inspection T-pieces, rubber covers and clear plastic pipe sections for seeing and clearing the flow.

6 product types71 sizes184 SKUs
Product types

Choose a type, then a size

Each type below lists every diameter with the wall thicknesses available in each finish. Quote by SKU, or send your own sizes and we make to them.

Inspection pipes
IN01

Inspection pipes

  • Galvanised and powder-coated in standard range with NBR seal
  • Stainless steel in standard range with silicone seal
  • Other materials available on request

Type code: IN01. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DNDimensions (mm unless °)Wall / availability, powder-coatedWall / availability, galvanisedWall / availability, stainless steel
80Ø d=77; A=80; L=2001.5 mm1.5 mm1 mm
100Ø d=100; A=115; L=2001.5 mm1.5 mm1 / 2 mm
120Ø d=120; A=115; L=2001.5 / 3 mm1.5 mm1 / 2 mm
140Ø d=136; A=115; L=2001.5 mm1.5 mm1 mm
150Ø d=150; A=115; L=2001.5 / 3 mm1.5 mm1 / 2 mm
175Ø d=175; A=115; L=2001.5 / 3 mm1.5 mm1 / 2 mm
200Ø d=200; A=115; L=2001.5 / 3 mm1.5 mm1 / 2 mm
224Ø d=220; A=115; L=2001.5 mm1.5 mm1 mm
250Ø d=250; A=115; L=2001.5 / 3 mm1.5 mm1 / 2 mm
280Ø d=277; A=115; L=2001.5 mm1.5 mm1.5 mm
300Ø d=300; A=115; L=2001.5 / 3 mm1.5 mm1 / 2 mm
315Ø d=312; A=115; L=2001.5 mm1.5 mm1.5 mm
350Ø d=350; A=115; L=2001.5 / 3 mm1.5 mm1 / 2 mm
400Ø d=399; A=115; L=2001.5 / 3 mm1.5 mm1 / 2 mm
Cleaning pipes
IN02

Cleaning pipes

  • Galvanised and powder-coated in standard range with EPDM (sponge rubber) seal
  • Stainless steel with foam silicone seal
  • Other materials available on request
  • Not recommended for extracting exhaust air containing condensates

Type code: IN02. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DNDimensions (mm unless °)Wall / availability, powder-coatedWall / availability, galvanisedWall / availability, stainless steel
200Ø d=200; B=350; L=4861.5 mm1.5 mm1.5 mm
224Ø d=220; B=350; L=4861.5 mm1.5 mm1.5 mm
250Ø d=250; B=350; L=4861.5 mm1.5 mm1.5 mm
280Ø d=277; B=350; L=4861.5 mm1.5 mm1.5 mm
300Ø d=300; B=350; L=4861.5 mm1.5 mm1.5 mm
315Ø d=312; B=350; L=4861.5 mm1.5 mm1.5 mm
350Ø d=350; B=350; L=4861.5 mm1.5 mm1.5 mm
400Ø d=399; B=350; L=4861.5 mm1.5 mm1.5 mm
450Ø d=448; B=350; L=4862 mm2 mm2 mm
500Ø d=498; B=350; L=4862 mm2 mm2 mm
560Ø d=558; B=350; L=4862 mm2 mm2 mm
630Ø d=628; B=350; L=4862 mm2 mm2 mm
Inspection T-pieces
IN03

Inspection T-pieces

  • For use in conjunction with a rubber cover
  • Refer to dimension A to select the right rubber cover or blank off cover

Type code: IN03. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DNDimensions (mm unless °)Wall / availability, powder-coatedWall / availability, galvanisedWall / availability, stainless steel
100Ø d=100; Ø A=100; B=79; L=1651.5 mm1.5 mm1 / 2 mm
120Ø d=120; Ø A=100; B=89; L=1651.5 / 3 mm1.5 mm1 / 2 mm
150Ø d=150; Ø A=120; B=100; L=1981.5 / 3 mm1.5 mm1 / 2 mm
175Ø d=175; Ø A=150; B=114; L=2252 / 3 mm1.5 mm1 / 2 mm
200Ø d=200; Ø A=150; B=125; L=2251.5 / 2 / 3 mm1.5 mm1 / 2 mm
250Ø d=250; Ø A=150; B=150; L=2251.5 / 2 / 3 mm1.5 mm1 / 2 mm
300Ø d=300; Ø A=150; B=177; L=2251.5 / 2 / 3 mm1.5 mm1 / 2 mm
Rubber covers
IN04

Rubber covers

  • To select the right rubber cover, please refer to dimension A of the inspection T-piece

Type code: IN04. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DNConfigurationDimensions (mm unless °)Wall / availability, siliconeWall / availability, TPEWall / availability, NBR
80Silicone (-60°C to +200°C)Ø A=79; Ø B=99; C=5; E=20●——
80Silicone (blue) (-60°C to +200°C)Ø A=79; Ø B=99; C=5; E=20●——
80TPE (-30°C to +100°C)Ø A=79; Ø B=99; C=5; E=20—●—
100NBR (-30°C to +90°C)Ø A=101; Ø B=121; C=5; E=21——●
100Silicone (-60°C to +200°C)Ø A=102; Ø B=121; C=5; E=21●——
100Silicone (blue) (-60°C to +200°C)Ø A=102; Ø B=121; C=5; E=21●——
100TPE (-30°C to +100°C)Ø A=101; Ø B=121; C=5; E=21—●—
120NBR (-30°C to +90°C)Ø A=121; Ø B=141; C=5; E=22——●
120Silicone (-60°C to +200°C)Ø A=123; Ø B=141; C=5; E=22●——
120Silicone (blue) (-60°C to +200°C)Ø A=123; Ø B=141; C=5; E=22●——
120TPE (-30°C to +100°C)Ø A=121; Ø B=141; C=5; E=22—●—
150NBR (-30°C to +90°C)Ø A=151; Ø B=171; C=6; E=24——●
150Silicone (-60°C to +200°C)Ø A=151; Ø B=171; C=6; E=24●——
150Silicone (blue) (-60°C to +200°C)Ø A=151; Ø B=171; C=6; E=24●——
150TPE (-30°C to +100°C)Ø A=151; Ø B=171; C=6; E=24—●—
175NBR (-30°C to +90°C)Ø A=176; Ø B=197; C=6; E=29——●
175Silicone (-60°C to +200°C)Ø A=176; Ø B=197; C=6; E=25●——
175Silicone (blue) (-60°C to +200°C)Ø A=176; Ø B=197; C=6; E=25●——
175TPE (-30°C to +100°C)Ø A=176; Ø B=197; C=6; E=29—●—
200NBR (-30°C to +90°C)Ø A=201; Ø B=221; C=6; E=26——●
200Silicone (-60°C to +200°C)Ø A=202; Ø B=221; C=6; E=26●——
200Silicone (blue) (-60°C to +200°C)Ø A=202; Ø B=221; C=6; E=26●——
200TPE (-30°C to +100°C)Ø A=201; Ø B=221; C=6; E=26—●—
250NBR (-30°C to +90°C)Ø A=251; Ø B=271; C=7; E=30——●
250Silicone (-60°C to +200°C)Ø A=252; Ø B=271; C=7; E=30●——
250Silicone (blue) (-60°C to +200°C)Ø A=252; Ø B=271; C=7; E=30●——
250TPE (-30°C to +100°C)Ø A=251; Ø B=271; C=7; E=30—●—
300NBR (-30°C to +90°C)Ø A=301; Ø B=321; C=7; E=32——●
300Silicone (-60°C to +200°C)Ø A=302; Ø B=321; C=7; E=32●——
300Silicone (blue) (-60°C to +200°C)Ø A=302; Ø B=321; C=7; E=32●——
300TPE (-30°C to +100°C)Ø A=301; Ø B=321; C=7; E=32—●—
Additional rubber cover locks
IN05

Additional rubber cover locks

  • For use in conjunction with inspection T-pieces and rubber covers

Type code: IN05. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

Send your inlet, outlet and installation dimensions for this configuration.

Plexiglass pipes with sockets and rod spacers
IN06

Plexiglass pipes with sockets and rod spacers

  • Including sockets with a lip
  • NEW: with rod spacers for a stronger construction
  • Temperature-resistant to 70°C
  • Plexiglass pipes must not be installed in load bearing situations
  • DN 60 to 150 mm and DN 200 mm made of seamless plexiglass

Type code: IN06. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DNDimensions (mm unless °)Wall / availability, powder-coatedWall / availability, stainless steelWall / availability, electro-galvanised
80Ø d=78; A=75; B=62; L=2001 mm1 mm1 mm
100Ø d=100; A=75; B=72; L=2001 mm1 mm1 mm
120Ø d=120; A=75; B=83; L=2001 mm1 mm1 mm
150Ø d=150; A=75; B=97; L=2001 mm1 mm1 mm
175Ø d=175; A=100; B=104; L=2001 mm1 mm1 mm
200Ø d=200; A=150; B=117; L=2501 mm1 mm1 mm
250Ø d=250; A=150; B=142; L=2501 mm1 mm1 mm
Quote

Send SKUs, a list or a drawing

Farivo engineering team

List the SKUs and quantities, or the diameters, wall thickness and finish you need. An engineer replies on WhatsApp or email.

WhatsApp Farivo

Send your enquiry details

  • SKUs and quantities, e.g. IN01-200-20G × 12
  • Country
  • WhatsApp or email
  • Or: diameters, wall thickness, finish and what the pipes connect
WhatsAppEmail