Slide Gates & Throttle Valves

Product types

Choose a type, then a size

Each type below lists every diameter with the wall thicknesses available in each finish. Quote by SKU, or send your own sizes and we make to them.

GV01

Throttle valves, hand-operated

Larger diameters available on request
For manual continuous flow regulation
Silicone rubber seal
Temperature resistance: -60°C to +180°C

Type code: GV01. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Configuration	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, galvanised	Wall / availability, stainless steel
60		Ø d=57; A=79; B=63; L=60	1.5 mm	—	1.5 mm
80		Ø d=77; A=90; B=74; L=100	1.5 mm	1.5 mm	1.5 mm
80	With seal	Ø d=77; A=121; B=83; L=100	1.5 mm	—	2 mm
100		Ø d=100; A=101; B=85; L=100	1.5 mm	1.5 mm	1.5 / 2 mm
100	With seal	Ø d=99; A=133; B=93; L=100	2 mm	—	2 mm
120		Ø d=120; A=124; B=103; L=120	1.5 mm	1.5 mm	1.5 / 2 mm
120	With seal	Ø d=119; A=143; B=103; L=120	2 mm	—	2 mm
140		Ø d=136; A=132; B=111; L=140	1.5 mm	1.5 mm	1.5 mm
140	With seal	Ø d=135; A=151; B=111; L=140	2 mm	—	2 mm
150		Ø d=150; A=139; B=118; L=150	1.5 mm	1.5 mm	1.5 / 2 mm
150	With seal	Ø d=149; A=158; B=116; L=150	2 mm	—	2 mm
175		Ø d=175; A=152; B=130; L=175	1.5 mm	1.5 mm	1.5 / 2 mm
175	With seal	Ø d=174; A=170; B=131; L=175	2 mm	—	2 mm
200		Ø d=200; A=164; B=143; L=200	1.5 mm	1.5 mm	1.5 / 2 mm
200	With seal	Ø d=199; A=183; B=143; L=200	2 mm	—	2 mm
224		Ø d=220; A=174; B=153; L=200	1.5 mm	1.5 mm	1.5 mm
224	With seal	Ø d=219; A=193; B=153; L=200	2 mm	—	2 mm
250		Ø d=250; A=189; B=168; L=200	1.5 mm	1.5 mm	1.5 / 2 mm
250	With seal	Ø d=249; A=208; B=168; L=200	2 mm	—	2 mm
280		Ø d=277; A=203; B=181; L=200	1.5 mm	1.5 mm	2 mm
280	With seal	Ø d=276; A=222; B=182; L=200	2 mm	—	2 mm
300		Ø d=300; A=214; B=193; L=200	1.5 mm	1.5 mm	1.5 / 2 mm
300	With seal	Ø d=299; A=233; B=193; L=200	2 mm	—	2 mm
315		Ø d=312; A=220; B=199; L=200	2 mm	2 mm	2 mm
315	With seal	Ø d=311; A=272; B=220; L=200	2 mm	—	2 mm
350		Ø d=350; A=239; B=218; L=200	2 mm	2 mm	2 mm
350	With seal	Ø d=349; A=291; B=239; L=200	2 mm	—	2 mm
400		Ø d=399; A=264; B=242; L=200	2 mm	2 mm	2 mm
400	With seal	Ø d=398; A=316; B=264; L=200	2 mm	—	2 mm

GV02

Throttle valves with pneumatic rotary actuator

5/2-way solenoid valve (1-coil)
2 mechanical limit switches and solenoid valve wired in a limit switch box
Switch-over time for 90°: < 3 seconds
Throttle valve defaults to closed when current is cut
Larger diameters available on request

Type code: GV02. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Configuration	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
60	24 V DC	Ø d=57; A=280; B=63; C=79; L=60	1.5 mm	1.5 mm
60	230 V AC	Ø d=57; A=280; B=63; C=79; L=60	1.5 mm	1.5 mm
80	24 V DC	Ø d=76; A=303; B=87; C=79; L=100	2 mm	2 mm
80	24 V DC	Ø d=77; A=303; B=87; C=79; L=100	1.5 mm	1.5 mm
80	230 V AC	Ø d=76; A=303; B=87; C=79; L=100	2 mm	2 mm
80	230 V AC	Ø d=77; A=303; B=87; C=79; L=100	1.5 mm	1.5 mm
100	24 V DC	Ø d=99; A=315; B=99; C=79; L=100	2 mm	2 mm
100	24 V DC	Ø d=100; A=315; B=99; C=79; L=100	1.5 mm	1.5 mm
100	230 V AC	Ø d=99; A=315; B=99; C=79; L=100	2 mm	2 mm
100	230 V AC	Ø d=100; A=315; B=99; C=79; L=100	1.5 mm	1.5 mm
120	24 V DC	Ø d=119; A=325; B=109; C=79; L=120	2 mm	2 mm
120	24 V DC	Ø d=120; A=325; B=109; C=79; L=120	1.5 mm	1.5 mm
120	230 V AC	Ø d=119; A=325; B=109; C=79; L=120	2 mm	2 mm
120	230 V AC	Ø d=120; A=325; B=109; C=79; L=120	1.5 mm	1.5 mm
140	24 V DC	Ø d=135; A=333; B=117; C=79; L=140	2 mm	2 mm
140	24 V DC	Ø d=136; A=333; B=117; C=79; L=140	1.5 mm	1.5 mm
140	230 V AC	Ø d=135; A=333; B=117; C=79; L=140	2 mm	2 mm
140	230 V AC	Ø d=136; A=333; B=117; C=79; L=140	1.5 mm	1.5 mm
150	24 V DC	Ø d=149; A=340; B=124; C=79; L=150	2 mm	2 mm
150	24 V DC	Ø d=150; A=340; B=124; C=79; L=150	1.5 mm	1.5 mm
150	230 V AC	Ø d=149; A=340; B=124; C=79; L=150	2 mm	2 mm
150	230 V AC	Ø d=150; A=340; B=124; C=79; L=150	1.5 mm	1.5 mm
175	24 V DC	Ø d=174; A=352; B=136; C=84; L=175	2 mm	2 mm
175	24 V DC	Ø d=175; A=352; B=136; C=84; L=175	1.5 mm	1.5 mm
175	230 V AC	Ø d=174; A=352; B=136; C=84; L=175	2 mm	2 mm
175	230 V AC	Ø d=175; A=352; B=136; C=84; L=175	1.5 mm	1.5 mm
200	24 V DC	Ø d=199; A=385; B=149; C=84; L=200	2 mm	2 mm
200	24 V DC	Ø d=200; A=364; B=149; C=84; L=200	1.5 mm	1.5 mm
200	230 V AC	Ø d=199; A=385; B=149; C=84; L=200	2 mm	2 mm
200	230 V AC	Ø d=200; A=364; B=149; C=84; L=200	1.5 mm	1.5 mm
224	24 V DC	Ø d=219; A=395; B=159; C=84; L=200	2 mm	2 mm
224	24 V DC	Ø d=220; A=374; B=159; C=84; L=200	1.5 mm	1.5 mm
224	230 V AC	Ø d=219; A=395; B=159; C=84; L=200	2 mm	2 mm
224	230 V AC	Ø d=220; A=374; B=159; C=84; L=200	1.5 mm	1.5 mm
250	24 V DC	Ø d=249; A=410; B=174; C=84; L=200	2 mm	2 mm
250	24 V DC	Ø d=250; A=388; B=174; C=84; L=200	1.5 mm	1.5 mm
250	230 V AC	Ø d=249; A=410; B=174; C=84; L=200	2 mm	2 mm
250	230 V AC	Ø d=250; A=388; B=174; C=84; L=200	1.5 mm	1.5 mm
280	24 V DC	Ø d=276; A=413; B=188; C=84; L=200	2 mm	2 mm
280	24 V DC	Ø d=277; A=403; B=188; C=84; L=200	1.5 mm	1.5 mm
280	230 V AC	Ø d=276; A=413; B=188; C=84; L=200	2 mm	2 mm
280	230 V AC	Ø d=277; A=403; B=188; C=84; L=200	1.5 mm	1.5 mm
300	24 V DC	Ø d=299; A=439; B=199; C=84; L=200	2 mm	2 mm
300	24 V DC	Ø d=300; A=414; B=199; C=84; L=200	1.5 mm	1.5 mm
300	230 V AC	Ø d=299; A=439; B=199; C=84; L=200	2 mm	2 mm
300	230 V AC	Ø d=300; A=414; B=199; C=84; L=200	1.5 mm	1.5 mm
315	24 V DC	Ø d=311; A=455; B=220; C=84; L=200	2 mm	2 mm
315	24 V DC	Ø d=312; A=422; B=205; C=84; L=200	2 mm	2 mm
315	230 V AC	Ø d=311; A=455; B=220; C=84; L=200	2 mm	2 mm
315	230 V AC	Ø d=312; A=422; B=205; C=84; L=200	2 mm	2 mm
350	24 V DC	Ø d=349; A=474; B=239; C=84; L=200	2 mm	2 mm
350	24 V DC	Ø d=350; A=460; B=224; C=84; L=200	2 mm	2 mm
350	230 V AC	Ø d=349; A=474; B=239; C=84; L=200	2 mm	2 mm
350	230 V AC	Ø d=350; A=460; B=224; C=84; L=200	2 mm	2 mm
400	24 V DC	Ø d=399; A=485; B=248; C=84; L=200	2 mm	2 mm
400	24 V DC	Ø d=399; A=499; B=264; C=84; L=200	2 mm	2 mm
400	230 V AC	Ø d=399; A=485; B=248; C=84; L=200	2 mm	2 mm
400	230 V AC	Ø d=399; A=499; B=264; C=84; L=200	2 mm	2 mm

GV03

Throttle valves with electrically-operated valve actuator

Switch-over time for 90°: approx. 150 seconds
With external control voltage 0 to 10 V DC on request
Silicone rubber seal

Type code: GV03. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
60	Ø d=57; A=145; B=63; L=60	1.5 mm	1.5 mm
80	Ø d=76; A=166; B=86; L=100	2 mm	2 mm
80	Ø d=77; A=166; B=87; L=100	1.5 mm	1.5 mm
100	Ø d=99; A=179; B=98; L=100	2 mm	2 mm
100	Ø d=100; A=179; B=99; L=100	1.5 mm	1.5 mm
120	Ø d=119; A=189; B=108; L=120	2 mm	2 mm
120	Ø d=120; A=189; B=109; L=120	1.5 mm	1.5 mm
140	Ø d=135; A=197; B=116; L=140	2 mm	2 mm
140	Ø d=136; A=197; B=117; L=140	1.5 mm	1.5 mm
150	Ø d=149; A=204; B=123; L=150	2 mm	2 mm
150	Ø d=150; A=204; B=124; L=150	1.5 mm	1.5 mm
175	Ø d=174; A=216; B=135; L=175	2 mm	2 mm
175	Ø d=175; A=216; B=136; L=175	1.5 mm	1.5 mm
200	Ø d=199; A=229; B=148; L=200	2 mm	2 mm
200	Ø d=200; A=229; B=149; L=200	1.5 mm	1.5 mm
224	Ø d=220; A=239; B=159; L=200	1.5 mm	1.5 mm
250	Ø d=250; A=254; B=174; L=200	1.5 mm	1.5 mm
280	Ø d=277; A=403; B=188; L=200	1.5 mm	1.5 mm
300	Ø d=300; A=277; B=199; L=200	1.5 mm	1.5 mm

GV04

Throttle valves with electrically-operated adjustable drive

Including 2 limit switches
Switch-over time for 90°: approx. 11-12 seconds
Larger diameters available on request

Type code: GV04. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
60	Ø d=57; A=240; B=63; L=60	1.5 mm	1.5 mm
80	Ø d=77; A=250; B=75; L=100	1.5 mm	1.5 mm
100	Ø d=99; A=262; B=85; L=100	1.5 mm	1.5 mm
120	Ø d=119; A=277; B=103; L=120	1.5 mm	1.5 mm
140	Ø d=135; A=285; B=111; L=140	1.5 mm	1.5 mm
150	Ø d=149; A=293; B=118; L=150	1.5 mm	1.5 mm
175	Ø d=174; A=305; B=131; L=175	1.5 mm	1.5 mm
200	Ø d=199; A=317; B=143; L=200	1.5 mm	1.5 mm
224	Ø d=219; A=327; B=153; L=200	1.5 mm	1.5 mm
250	Ø d=249; A=342; B=168; L=200	1.5 mm	1.5 mm
280	Ø d=276; A=357; B=182; L=200	1.5 mm	1.5 mm
300	Ø d=299; A=368; B=193; L=200	1.5 mm	1.5 mm
315	Ø d=311; A=374; B=199; L=200	2 mm	2 mm
350	Ø d=349; A=393; B=218; L=200	2 mm	2 mm
400	Ø d=398; A=418; B=242; L=200	2 mm	2 mm

GV05

Throttle valves with electrically-operated adjustable actuator

Including 2 limit switches
Switch-over time for 90°: approx. 12-22 seconds
Silicone rubber seal
Larger diameters available on request

Type code: GV05. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
80	Ø d=77; A=256; B=82; L=100	2 mm	2 mm
100	Ø d=99; A=267; B=93; L=100	2 mm	2 mm
120	Ø d=119; A=277; B=103; L=120	2 mm	2 mm
140	Ø d=135; A=285; B=111; L=140	2 mm	2 mm
150	Ø d=149; A=293; B=118; L=150	2 mm	2 mm
175	Ø d=174; A=305; B=131; L=175	2 mm	2 mm
200	Ø d=199; A=317; B=143; L=200	2 mm	2 mm
224	Ø d=219; A=327; B=153; L=200	2 mm	2 mm
250	Ø d=249; A=342; B=168; L=200	2 mm	2 mm
280	Ø d=276; A=356; B=182; L=200	2 mm	2 mm
300	Ø d=299; A=368; B=193; L=200	2 mm	2 mm
315	Ø d=311; A=386; B=220; L=200	2 mm	2 mm
350	Ø d=349; A=405; B=239; L=200	2 mm	2 mm
400	Ø d=398; A=430; B=264; L=200	2 mm	2 mm

GV06

Adjustable blank-off covers

Type code: GV06. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
80	Ø A=70; Ø B=92	1.5 mm	1.5 mm
100	Ø A=90; Ø B=115	1.5 mm	1.5 mm
120	Ø A=110; Ø B=135	1.5 mm	1.5 mm
140	Ø A=126; Ø B=151	1.5 mm	1.5 mm
150	Ø A=140; Ø B=165	1.5 mm	1.5 mm
175	Ø A=165; Ø B=190	1.5 mm	1.5 mm
200	Ø A=190; Ø B=215	1.5 mm	1.5 mm
224	Ø A=210; Ø B=235	1.5 mm	1.5 mm
250	Ø A=240; Ø B=265	1.5 mm	1.5 mm
280	Ø A=270; Ø B=292	1.5 mm	1.5 mm
300	Ø A=290; Ø B=315	1.5 mm	1.5 mm

GV07

Air bleeds

Type code: GV07. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
80	Ø d=78; L=100	1 mm	1 mm
100	Ø d=100; L=100	1 mm	1 mm
120	Ø d=120; L=100	1 mm	1 mm
140	Ø d=136; L=100	1 mm	1 mm
150	Ø d=150; L=100	1 mm	1 mm
175	Ø d=175; L=100	1 mm	1 mm
200	Ø d=200; L=100	1 mm	1 mm

GV08

Non-return valves

Lever arm and weights adjustable
Powder-coated: Grey NK-SBR inner seal from -40°C to +70°C, grey NBR U-shaped seal
Stainless steel: Transparent silicone inner seal from -60°C to +230°C, beige silicone U-shaped seal

Type code: GV08. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
80	Ø d=76; Ø A=150; B=95; C=90; E=20; L=210	2 mm	2 mm
100	Ø d=99; Ø A=175; B=115; C=90; E=22.5; L=230	2 mm	2 mm
120	Ø d=119; Ø A=200; B=130; C=100; E=25; L=255	2 mm	2 mm
150	Ø d=149; Ø A=250; B=135; C=120; E=35; L=280	2 mm	2 mm
175	Ø d=174; Ø A=300; B=150; C=140; E=47.5; L=315	2 mm	2 mm
200	Ø d=199; Ø A=300; B=185; C=140; E=35; L=350	2 mm	2 mm
250	Ø d=249; Ø A=350; B=225; C=165; E=35; L=415	2 mm	2 mm
300	Ø d=299; Ø A=450; B=260; C=195; E=55; L=480	2 mm	2 mm

GV09

Pipe regulator gates

Only for granular products
Only for installation in inclined pipelines with the operating mechanism facing upwards

Type code: GV09. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
100	Ø d=99; A=100; L=70	2 mm	2 mm
120	Ø d=119; A=120; L=70	2 mm	2 mm
150	Ø d=149; A=150; L=70	2 mm	2 mm
175	Ø d=174; A=180; L=70	2 mm	2 mm
200	Ø d=199; A=200; L=70	2 mm	2 mm
250	Ø d=249; A=250; L=70	2 mm	2 mm
300	Ø d=299; A=300; L=70	2 mm	2 mm

GV10

Pipe slide gates, hand-operated

Stainless steel: Silicone slide plate seal
Powder-coated and galvanised version: Felt seal

Type code: GV10. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, galvanised	Wall / availability, stainless steel
80	Ø d=78; A=225; B=120; C=160; E=28; F=103; L=153	1 mm	1 mm	1 mm
100	Ø d=99; A=225; B=120; C=160; E=28; F=60; L=108	2 mm	2 mm	2 mm
120	Ø d=119; A=251; B=140; C=180; E=27; F=70; L=138	—	2 mm	2 mm
120	Ø d=119; A=251; B=140; C=180; E=28; F=70; L=138	2 mm	—	—
150	Ø d=149; A=295; B=180; C=220; E=25; F=85; L=152	2 mm	2 mm	2 mm
175	Ø d=174; A=320; B=200; C=245; E=28; F=145; L=212	2 mm	2 mm	2 mm
200	Ø d=199; A=410; B=250; C=290; E=26; F=115; L=182	2 mm	2 mm	2 mm
250	Ø d=249; A=432; B=300; C=345; E=30; F=150; L=217	2 mm	2 mm	2 mm
300	Ø d=299; A=512; B=350; C=395; E=30; F=210; L=277	2 mm	2 mm	2 mm

GV11

Air flow control gates

Only for air pipelines

Type code: GV11. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel	Wall / availability, electro-galvanised
80	Ø d=78; A=148; L=50	1.5 mm	1.5 mm	1.5 mm
100	Ø d=100; A=175; L=58	1.5 mm	1.5 mm	1.5 mm
120	Ø d=120; A=205; L=58	1.5 mm	1.5 mm	1.5 mm
140	Ø d=136; A=242; L=70	1.5 mm	1.5 mm	1.5 mm
150	Ø d=150; A=250; L=70	1.5 mm	1.5 mm	1.5 mm
175	Ø d=175; A=290; L=70	1.5 mm	1.5 mm	1.5 mm
200	Ø d=200; A=335; L=70	1.5 mm	1.5 mm	1.5 mm
224	Ø d=220; A=392; L=70	1.5 mm	1.5 mm	1.5 mm
250	Ø d=250; A=410; L=100	1.5 mm	1.5 mm	1.5 mm
300	Ø d=299; A=485; L=100	2 mm	2 mm	2 mm
350	Ø d=349; A=560; L=100	—	2 mm	2 mm
400	Ø d=398; A=636; L=100	—	2 mm	2 mm
450	Ø d=448; A=710; L=100	—	2 mm	2 mm
500	Ø d=498; A=795; L=100	—	2 mm	2 mm

GV12

Pipe slide gates, pneumatically operated

5/2-way solenoid valve (1-coil) with auxiliary hand operation and 2 limit switches, potential-free
For shutting off granular bulk goods without over-pressure in the pipework system
Slide gate closes when the electricity supply is cut
Stainless steel: Silicone slide plate seal: -60°C to +250°C
Powder-coated version: Felt seal

Type code: GV12. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Configuration	Dimensions (mm unless °)	Wall / availability, powder-coated	Wall / availability, stainless steel
100	Silo outlet; 24 V DC	Ø d=99; B=160; C=320; E=80; F=578; L=108	2 mm	2 mm
100	Silo outlet; 230 V AC	Ø d=99; B=160; C=320; E=80; F=578; L=108	2 mm	2 mm
120	Silo outlet; 24 V DC	Ø d=119; B=180; C=360; E=90; F=618; L=138	2 mm	2 mm
120	Silo outlet; 230 V AC	Ø d=119; B=180; C=360; E=90; F=618; L=138	2 mm	2 mm
150	Silo outlet; 24 V DC	Ø d=149; B=225; C=505; E=110; F=782; L=152	2 mm	2 mm
150	Silo outlet; 230 V AC	Ø d=149; B=225; C=505; E=110; F=782; L=152	2 mm	2 mm
175	Silo outlet; 24 V DC	Ø d=174; B=250; C=555; E=123; F=882; L=212	2 mm	2 mm
175	Silo outlet; 230 V AC	Ø d=174; B=250; C=555; E=123; F=882; L=212	2 mm	2 mm
200	Silo outlet; 24 V DC	Ø d=199; B=295; C=645; E=148; F=1055; L=182	2 mm	2 mm
200	Silo outlet; 230 V AC	Ø d=199; B=295; C=645; E=148; F=1055; L=182	2 mm	2 mm
250	Silo outlet; 24 V DC	Ø d=249; B=350; C=780; E=173; F=1210; L=217	2 mm	2 mm
250	Silo outlet; 230 V AC	Ø d=249; B=350; C=780; E=173; F=1210; L=217	2 mm	2 mm
300	Silo outlet; 24 V DC	Ø d=299; B=400; C=880; E=198; F=1360; L=277	2 mm	2 mm
300	Silo outlet; 230 V AC	Ø d=299; B=400; C=880; E=198; F=1360; L=277	2 mm	2 mm

GV13

Silo (redler) outlet slide gates, pneumatically operated

5/2-way solenoid valve (1-coil) with auxiliary hand operation and 2 limit switches, potential-free
Slide plate runs on ball bearings in a U-frame
Steel, primed, powder coating on request
For shutting off granular bulk goods without over-pressure in the pipework system
Slide gate closes when the electricity supply is cut

Type code: GV13. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Configuration	Dimensions (mm unless °)	Wall / availability, primed steel
150	Redler cross-slide; 24 V DC; With 2 mm spout	Ø d=149; A=200; B=200; C=310; E=86; F=852; L=150	●
150	Redler cross-slide; 24 V DC; Without spout	Ø d=149; A=200; B=200; C=310; E=86; F=852; L=150	●
150	Redler cross-slide; 230 V AC; With 2 mm spout	Ø d=149; A=200; B=200; C=310; E=86; F=852; L=150	●
150	Redler cross-slide; 230 V AC; Without spout	Ø d=149; A=200; B=200; C=310; E=86; F=852; L=150	●
200	Redler cross-slide; 24 V DC; With 2 mm spout	Ø d=199; A=200; B=600; C=710; E=86; F=852; L=360	●
200	Redler cross-slide; 24 V DC; With 2 mm spout	Ø d=199; A=250; B=250; C=360; E=86; F=952; L=150	●
200	Redler cross-slide; 24 V DC; Without spout	Ø d=199; A=200; B=600; C=710; E=86; F=852; L=360	●
200	Redler cross-slide; 24 V DC; Without spout	Ø d=199; A=250; B=250; C=360; E=86; F=952; L=150	●
200	Redler cross-slide; 230 V AC; With 2 mm spout	Ø d=199; A=200; B=600; C=710; E=86; F=852; L=360	●
200	Redler cross-slide; 230 V AC; With 2 mm spout	Ø d=199; A=250; B=250; C=360; E=86; F=952; L=150	●
200	Redler cross-slide; 230 V AC; Without spout	Ø d=199; A=200; B=600; C=710; E=86; F=852; L=360	●
200	Redler cross-slide; 230 V AC; Without spout	Ø d=199; A=250; B=250; C=360; E=86; F=952; L=150	●
250	Redler cross-slide; 24 V DC; With 2 mm spout	Ø d=249; A=250; B=600; C=710; E=86; F=952; L=320	●
250	Redler cross-slide; 24 V DC; With 2 mm spout	Ø d=249; A=300; B=300; C=410; E=86; F=1052; L=150	●
250	Redler cross-slide; 24 V DC; Without spout	Ø d=249; A=250; B=600; C=710; E=86; F=952; L=320	●
250	Redler cross-slide; 24 V DC; Without spout	Ø d=249; A=300; B=300; C=410; E=86; F=1052; L=150	●
250	Redler cross-slide; 230 V AC; With 2 mm spout	Ø d=249; A=250; B=600; C=710; E=86; F=952; L=320	●
250	Redler cross-slide; 230 V AC; With 2 mm spout	Ø d=249; A=300; B=300; C=410; E=86; F=1052; L=150	●
250	Redler cross-slide; 230 V AC; Without spout	Ø d=249; A=250; B=600; C=710; E=86; F=952; L=320	●
250	Redler cross-slide; 230 V AC; Without spout	Ø d=249; A=300; B=300; C=410; E=86; F=1052; L=150	●
300	Redler cross-slide; 24 V DC; With 2 mm spout	Ø d=299; A=300; B=600; C=710; E=86; F=1052; L=270	●
300	Redler cross-slide; 24 V DC; Without spout	Ø d=299; A=300; B=600; C=710; E=86; F=1052; L=270	●
300	Redler cross-slide; 230 V AC; With 2 mm spout	Ø d=299; A=300; B=600; C=710; E=86; F=1052; L=270	●
300	Redler cross-slide; 230 V AC; Without spout	Ø d=299; A=300; B=600; C=710; E=86; F=1052; L=270	●

GV14

Silo / redler outlet slide gates, electrically-operated

Including worm-gear motor 380/400 V, 50 Hz and 2 mechanical limit switches
Slide plate runs on ball bearings in a U-frame
Steel, primed, powder coating on request
For shutting off granular bulk goods without over-pressure in the pipework system
Other dimensions available on request

Type code: GV14. Select the diameter, configuration and finish shown below. Send the type code and selected specification with your enquiry. A dot means availability without a stated wall thickness.

DN	Configuration	Dimensions (mm unless °)	Wall / availability, primed steel
150	Silo outlet; With 2 mm spout	Ø d=149; A=200; B=200; C=304; E=71; F=932; L=150	●
150	Silo outlet; Without spout	Ø d=149; A=200; B=200; C=304; E=71; F=932; L=150	●
200	Redler cross-slide; With 2 mm spout	Ø d=199; A=200; B=600; C=710; E=86; F=845; L=360	●
200	Redler cross-slide; Without spout	Ø d=199; A=200; B=600; C=710; E=86; F=845; L=360	●
200	Silo outlet; With 2 mm spout	Ø d=199; A=250; B=250; C=354; E=71; F=1082; L=150	●
200	Silo outlet; Without spout	Ø d=199; A=250; B=250; C=354; E=71; F=1082; L=150	●
250	Redler cross-slide; With 2 mm spout	Ø d=249; A=250; B=600; C=710; E=86; F=995; L=320	●
250	Redler cross-slide; Without spout	Ø d=249; A=250; B=600; C=710; E=86; F=995; L=320	●
250	Silo outlet; With 2 mm spout	Ø d=249; A=300; B=300; C=404; E=71; F=1232; L=150	●
250	Silo outlet; Without spout	Ø d=249; A=300; B=300; C=404; E=71; F=1232; L=150	●
300	Redler cross-slide; With 2 mm spout	Ø d=299; A=300; B=600; C=710; E=86; F=1145; L=270	●
300	Redler cross-slide; Without spout	Ø d=299; A=300; B=600; C=710; E=86; F=1145; L=270	●

Quote

Send SKUs, a list or a drawing

Farivo engineering team

List the SKUs and quantities, or the diameters, wall thickness and finish you need. An engineer replies on WhatsApp or email.

WhatsApp Farivo

Send your enquiry details

SKUs and quantities, e.g. GV01-200-20G × 12
Country
WhatsApp or email
Or: diameters, wall thickness, finish and what the pipes connect

WhatsApp Email

Slide gates and throttle valves