FDMW Horizontal Wheat Scourer
Uses mechanical impact and rubbing to remove surface impurities, fragile foreign matter and remaining husk from wheat.
- Model-by-model specifications
- Model specifications available
- Check the existing line layout
- Confirm interfaces before ordering
FDMW specifications
| Model | Screen diameter (mm) | Screen length (mm) | Shaft speed (r/min) | Capacity (t/h) | Light / heavy scouring power (kW) | L × W × H (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| FDMW30×60 | φ300 | 600 | 800–1200 | 2–4 | 4 / 5.5 | 1270×400×1210 | 450 |
| FDMW40×100 | φ400 | 1000 | 800–1200 | 4–7 | 5.5 / 7.5 | 2130×920×1700 | 710 |
| FDMW40×150 | φ400 | 1500 | 800–1200 | 7–10 | 7.5 / 11 | 2630×920×1700 | 750 |
| FDMW2×40×100 | φ400 | 1000 | 800–1200 | 8–14 | 2×5.5 / 2×7.5 | 2130×1490×1700 | 1200 |
| FDMW2×40×150 | φ400 | 1500 | 800–1200 | 14–20 | 2×7.5 / 2×11 | 2630×1490×1700 | 1500 |
Light and heavy scouring use different motor ratings. Select a lower or higher shaft speed within the stated range to suit the process; the two power columns are alternatives, not a combined load.
Screen dimensions refer to the screen tube, not the overall machine envelope.
Select the model by material, throughput and installation requirements.
Start with the duty in your flow sheet
Match the required hourly wheat flow to the capacity column, then check the overall envelope and motor power.
Send your duty and modelTechnical features
Impact and rubbing
Mechanical action cleans the wheat surface.
Beater construction
Wear-resistant precision-cast beaters work on the grain surface.
Balanced rotor
The rotor is dynamically balanced.
Main assemblies
Beating plates, screen cylinder, transmission and frame make up the machine.
Check the installation before choosing
Send the existing layout and nameplate with your enquiry.
Space & support
Use the model dimensions above.
Power supply
Tell us the site voltage and frequency.
Product connections
Send inlet and outlet locations.
Air system
Check the existing aspiration system.
Identify the machine before ordering parts
Send photographs and dimensions of the screen cylinder and beaters.
Position in the process
Indicative process position; confirm the routing against your flow sheet.
Questions about the FDMW
What warranty do I get?
1 year on the machine. Wear parts, including roll surfaces, belts, scrapers, brushes, screens and filter bags, are excluded.
What information is needed to choose a model?
Match the required hourly wheat flow to the capacity column, then check the overall envelope and motor power.
Can it replace my existing machine?
Send the nameplate, photographs and layout.
Where do the specifications come from?
Select the model by material, throughput and installation requirements.
Enquire about the FDMW
Choose a model and add your duty, country and contact details.
Farivo engineering team
Send the model, your capacity and country. We reply on WhatsApp or email.